Hot melt adhesive folding box machine is an independent module mechanism, mainly in its control mode. During operation, it is necessary to ensure its stability and accuracy. The equipment currently produced has a wide range of applications. At the time of operation, the flexibility of the hot melt adhesive folding box machine is very high.

Spray glue automatic hot melt glue folding box machine use methods and skills:

1. Connect the power cord, turn on the power switch on the control board, and press the emergency stop switch.

2, open the main power supply of the glue spraying machine, the temperature is set at about 150 ~ 180℃.

3, connect the air source: air pressure adjustment at 0.5-0.7MPa (refer to the instructions for specific operation)

4, place the carton: arrange the carton, check whether there is adhesion phenomenon, neatly stacked into the carton bin. The cartons must be stacked in the same direction.

5, through the point control and other auxiliary button switch, visual inspection of the feeding, folding ear, spray and other parts, to ensure that these important parts are free of debris and normal operation, if found problems should be timely notify the relevant technical personnel to solve.

6. When the temperature of the glue spraying machine reaches the set temperature. Open the glue spraying machine “ Start ” Button, then click &ldquo in the control panel; Start ” Press the button and the machine starts to run.

7. After the machine runs. Normal packaging production can be carried out by placing materials on the conveyor belt. The box taking mechanism is a very important part of the hot melt adhesive box folding machine, which has a great impact on the efficiency of the production line.

This influence can be said to be decisive. Therefore, in the production and manufacture of hot melt adhesive folding box machine, it is necessary to set a reasonable box taking mechanism. It plays a key role in the packaging industry. When we manufacture machines, we need to be customized according to the needs of manufacturers.